uv light machine for uv paint drying

There are two type of uv curing system, one is manual, the other is uv oven.fast drying, so that it rising production effeciency 10 secions.There is normally 6 of group uv lamp, so 12 pcs of uv light for the uv oven, outside should be covered with rock wool panel , because the light hurt eyes is stair at the light directly.

Curing time about

Advantages:

1.Factory direct sale

2.One year warranty,100% inspection before delivery,100% trade assurance protection

3.Advanced microcomputer control system

4.Fast infrared lamps drying system(Diesel or gas drying can be customized)

5.Installation instruction service

6.Experienced in shipping.

CE Professional Factory Electric Heating Car Paint Curing Oven

Inside Dimenions : 6900*3900*2650(mm)(L*W*H)

Outside Dimenions :7000*5500*3300(mm)(L*W*H)

Entrance Door : Aluminum alloy binding framework(thickness: 1.8mm),1 set folding door size: 3000*2600(mm)(W*H)

Personal Door: 1 set side hung door 700*1700mm(W*H)

Wallboard: 50mm EPS(epispastics polystyrene )insulation material with S=0.426 two side steel panel

Lighting System : Lamp boxes are 45 fixed on upper two side,with 8 groups*3pcs=24pcs 16w energy saving Led Lamp

Air Intake and Exhaust System: With 2pcs centrifugal air blowers,Total parameter:YOW5.6m.2*4kw.25000m3/h
With 1pcs centrifugal air blower,Single parameter:TAE-710H.5.5KW.18000m3/h

Cabinet Setting : Intake air from upside,downside exhaust wind.
Frame is made of tube 50*50mm, body plate is made of galvanized plate(thickness:0.8mm).

Air duc: tMade of Galvanized plate(Thickness is 0.6mm),700*700*1000,2 pcs straight,1 pc elbow

Made of Galvanized plate(Thickness is 0.6mm),700*700*1000,2 pcs straight,1 pc elbow

Heating System : 30pcs infrared carbon fiber heating lamps,800W/piece.

The operating temperature:50℃-75℃.Max.temperature:80℃

Filtration System:
1.Air inlet with prefilter.
2.Ceiling equipped with CC-G650type high-efficiency filter,which can effectively filter the 5PM dust particles.
3.With three layers of activated carbon, plus an Environmental protection cabinet.The Air filtration efficiency is more than or equal to 98,its Exhaust emission reaches the national standard.

Roof: Galvanized steel panel

Control System: Microcomputer touchable control system,Painting , Baking, Temperature Controller,Light Switch, Breakdown Indicator, Power Switch, Emergency Stop Switch, and Time Setting

Voltage Frequency: 380V 50HZ

Air Flow Speed:0.25m/s

Total Power: 38.5KW

Installation instructions and the matters need attention

Installments and operating instructions

1. Please turn on the power correctly, the zero line and the ground. 380 v three-phase five wire (blue for zero/double color for ground) : 220 v for three wire type.

2. Check electric oven electrical properties in advance before connect power, and whether there is a power outage or leakage phenomenon should be paid attention to

3. When turn on the oven power, the power indicator turns red, the voltmeter point to 380 v / 220 v. Press the system startup button, temperature controller have electricity, wind motor start work, open the heating switch, start heating instrument temperature is SET to the required temperature, temperature setting: instrument PV show the actual furnace temperature/SV display SET temperature, press SET first, and the SV display value flashing, moved to the bits you need/ten/one hundred and then press ▲ bring with increasing temperature, or press ▼ reduction to reduce the temperature, the final press SET key to determine what you SET temperature. The SV display value to stop flashing and automatically heating (heating instructions green light, current meter rotation) will automatic constant temperature oven.

4. Super temperature setting: in general, over temperature set temperature must be higher than the thermostat set temperature of 10 to 15 ℃, when over temperature, over temperature alarm and cut off the main power supply, breaking all heating systems, wind motor is normal working , when the over temperature thermostat is lower than the set temperature control instrument, according to the normal heating system to work normally.

5.High precision digital display timer automatically adjustable set timer time 999 minutes, 1, 2, 3 key on the panel respectively corresponding to the display value of, ten, hundred, after the time needed for any modification, there are three gear timer switch, intermediate gear for time out (with manual/automatic timing) manual timing for electric power system automatic timer began to reach the set time after, opens the door to take out the product

Contact us if you need more details on UV Light Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Mercury Lamp Uv Machine、Uv Paint Dryer Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Oven > UV Curing Oven