Wall Washer Lamp Came with Decorating/Highlighting Building Frame and Garden

Model NO.: LWW-5-24P-RGB-L840mm Power: 24W Diffuser: Tempered Glass Lifespan: 50000 hours Certification: CCC, CE, CQC, C-tick, EMC, FCC, LVD, PSE, RoHS, SAA, VDE Input Voltage: 100-256V AC Power Supply: Waterproof LED Driver LED Chip: Edison Control Mode: Independent, DMX, Master/Slave Mode Base Material: Aluminum Alloy Color Sync: Wireless/3XLR Specification: ROHS, CE HS Code: 940540900 Emitting Color: RGB/Single Color/Blacklight IP Rating: IP65 Beam Angle: 15,25,30,45,60,90 Degree Warranty: 2 Years Electric Current Type: DC Color: RGB/Single Colr/Blacklight Size: L840*W132*H82mm Lamp Power(W): 24W Luminous Efficiency: 100-110ml/W Working Temperature(Oc): -20°c~40°c(-4°f~104°f) Trademark: EWIN Origin: China Wall Washer Lamp Came with Decorating/highlighting Building Frame and Garden

Wireless Lighting Wall Washer with Round/Square Type Available (Newest Tect)
Control Edison LED Wall Washer w/ Independent MODE and DMX Mode (Built-in Functions)

Ewin Lighting Tech Address the Wireless control LED Wall Washer. I am expecting your attention and High Level Involvement to Take a Look.

Aluminum Alloy 
 (Black/White Housing color available) w/ Rotary Angle: 150 Degree. 

Application
Wireless Control LED Wall Washer Mainly used for Decorating and highlighting in Building Frame, Garden, etc which work in Independent mode and DMX mode; 

Color Changing Mode (RGB, Single Color, Available/Master Mode)
To Generate Various Color changing effects. Such AS 7 Colors Flashing/Fading/Chasing/Steady and 7 Color jumping Synchronously, Master/slave Mode color Changing effect.  
256 Class gray degree dimmer, DMX Programmable w/ thousands of effects available if Many Lighting connected together 

Control Mode 2 mode available
Independent Mode-Choose the color effects that you need by pressing the buttons on the side cap of light 
DMX Mode-International Standard DMX512 Wireless Signal Control & 3XLR Signal Cable Control, 

Tech Parameters
Input VOLT: 100-256V AC
Operating Voltage: 24V DC
IP Rating: IP65
Operating Temperature:  -20ºC~65ºC

Length(mm) available as follows Table
 

Model No	LED QTY	Color	Length(mm)	Power	Beam(°)
LWW-5-12P	12*1W	RGB/Single color	L440mm	12 Watts	15/30/45
LWW-5-12P	18*1W	RGB/Single color	L580mm	18 Watts	15/30/45
LWW-5-24P	24*1W	RGB/Single color	L840mm	24 Watts	15/30/45
LWW-5-36P	36*1W	RGB/Single color	L1120m	36 Watts	15/30/45
LWW-5-18*3W	18*3W	RGB/Single color	L1000mm	54 Watts	30/45/60
LWW-5-18*3W	18*3W	RGB (3IN1)	L1000mm	54 Watts	30/45/60

Best Selling Points, 
 
1. Wireless System Color SYNC
2. DMX 512 Control with Wireless Signal Control & 3XLR Signal Cable Control 
3. Independent Mode
4. Master/Slave Mode Color Control with RC (Remote Control) 
 
How To Connect Wireless LED Wall Washer and Control LED Wall washer with DMX, Master/slave. I am Happy to Answer any your Concern to THis Items. I am expecting you attention and Hight Level INVOLVEMENT To Talk more with us! 

Ewin Lighitng Technology , Shenzhen China!



THE issue of this Items to Our Customers&Concern to our business
__________________________________________________________________________________

How to Set up Control Mode/How to control LED Wall washer?
 
 
 (DMX Address) (Built-IN DMX)
1. When The Digital LED is not flashing, Press "A", digital LED Begin to flash, Press "A"again, active Digital Leds Moves Backward, Then you can start to edit the Second Digital LED, Press "B", the Corresponding flash digital LED increase one bit (Values from 0 to 9), Then Press "C"
 (Independent Mode)
2. Pressing "A" 4 times (Note: the first 3 times is setup on DMX Address), Entering into Independent Mode. The Digital LEDS Shows PXY, Press "A", Active digital LEDs Moves Backward, then you can choose function via  X and Parameter Via Y ; Press "B", The corresponding flash digital LED Increase one Bit (Values from 0 to 9), Than Press "C"


X Value and Y Value function settings

X value	Y value
1-single red	1~9 class gray degree
2- single green	1~9 class gray degree
3- single blue	1~9 class gray degree
4-single yellow	1~9 class gray degree
5-single purple	1~9 class gray degree
6- single cyan	1~9 class gray degree
7- single white	1~9 class gray degree
8-multicolor jumping	1~9 class speed
9-multicolor fading	1~9 class speed
A-multicolor flashing	1~9 class flash speed

(Auto Memorizing selected parameters)
3. When Pressing Button, Please wait for about 10 second, then you can Exit the mode of setting function. The Digital LED Stopping flashing and to Memorize the selected Parameters.
 
 
Master/Slave Mode: Wireless Color Sync : (The newest Tech. Wireless Color Sync)
 
Choosing any one light as the master as "001"The rest of them set as Slave (address can be any one except "001",  Then Changing function of The master Light, then all lights will work SYNCHRONOUSLY)


What is the Wireless system? 
1. 7 Group ID Code can be set, The user can Use the Independent 7 groups of wireless network and won't mutually interference.
2. 7 Group ID Code corresponding to the color of the RGB indicator light, only the same ID lamps can communicate with each other.
2. ID code can be chosen by the button. 
3. The indicator light kept lighting: No DMX or wireless signal.
4. LED red indicator light flashing: Signal sent
5. LED Green indicator Light flashing: Signal received.
6. Communication distance: 300 meters.
7. Working frequency ban: 2.4G, IM, 126 frequency Band.

2. Waterproof Treatment
This Signal output Connector XL-3R of the last fixture (Maximum 30 fixtures) of each series must be wrapped with waterproof tape (Auto-adhesive, please refer to instruction for Operation), Thence Sealed with a Φ20 Thermal shrinking sleeve and blow and shrink it with a hair drier for waterproof purpose.

Have Already Built-in DMX Control ,why need Master Pro-3CH Controller with Remote Controller
 
Master Pro-3CH Controller consist of main Controller and Remote Controller. It provides a Convenient and Easy way for Customers. The Controller is only compatible and available for the LED light Fixture with R,G,B, and 3 DMX channels. For indoor use Via connection of DMX Cables. (3XLR Signal Cable connection)

Tech Parameters
Size: L165*105*48mm
Weight: 0.67kgs
Working Temp:  -20 ~ 55 ºC              
Input Volt: 120V AC 240V AC
Power: 3W
Protection:  IP20

Contact us if you need more details on Wall Washer Lamp. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Lighting Wall Washer、Wireless Wall Washer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : LED Wall Washer